Packing your belongings into cardboard boxes may seem like a fairly simple process. However, there’s more that goes into moving than you might think.
You need to do more than toss things in a box if you want things to go smoothly. Not only will this technique make it hard for you to unpack, but it also increases the chances of those items being damaged. It can be heartbreaking to open a box and see that one of your treasured possessions has been broken.
By using the right techniques, you’ll be able to properly pack all your items, and you’ll be able to unpack them without any problems. With this guide, you’ll be able to learn more about loading up cardboard boxes. This information will help you to avoid issues during your move.
Make Sure Your Boxes Aren’t Overloaded
You should fill the boxes you pack up, but you should keep the weight of the box in mind as you pack. If the Gaylord boxes are too heavy to be lifted alone, that’s a problem
When you need two people to lift a single box, it makes moving much harder. Keeping boxes at a reasonable weight will save you a lot of hassle.
How heavy should a cardboard box be? You should keep the size of the box in mind. Typically, a weight of 30 pounds or lower is suitable for a cardboard box. If the box is on the larger side, however, it could wind up being heavier than that.
Prior to packing, take a look at the bottom of the box. If you’re using a moving box, it’s likely that you’ll see a weight limit there. Use that number as a guideline. Always stay below the weight limit for the box.
Stick to Smaller Boxes
People often assume that it’s best to use as few boxes as possible when packing. However, if you limit yourself to large boxes, you might have a hard time moving those boxes along once they’re packed.
Instead, use more boxes that are smaller in size. It may take a little extra time to pack everything up. However, once the boxes are fully packed, you’ll be able to move them with ease.
Pay Attention to How Heavy the Items You’re Packing Are
In some cases, the items you’re packing will be heavy enough to make a small box difficult to carry. Books are a great example of this.
A box loaded up with books can become too heavy very quickly. That’s why it’s best to only put small stacks of books in a single box.
Splitting up your books might seem like an annoyance. In the long run, however, keeping your boxes on the light side will save you some headaches.
Make Sure Your Boxes Are Full
You shouldn’t overload your boxes, but you should fill them up. A box with a lot of empty space can cause issues. Why is that the case?
Typically, boxes are stacked on top of each other during a move. If a box is partially empty, and a full box is placed on top of it, the box could collapse.
If there aren’t enough items to fill up a box, using paper, moving peanuts, or another material to fill up the box before you seal it. That way, the box won’t be smashed, and the items inside the box will be kept safe.
Remove Items If a Box Can’t Be Closed
You should be able to close the lid of a cardboard box without any issues. If your box bulges when you try to close it, or if there’s bending at the lid, remove some things before you seal it up.
If there’s too much in a box, it could wind up bursting open during your move. It’s safer to use another box instead of packing too much into a box that’s completely full.