Did you know that 51 percent of millennial women buy jewelry for themselves? There is a large demand for jewelry, but it is normal to want clean jewelry to get the most out of your jewelry.
Wearing tarnished jewelry doesn’t create the same effect. It makes your jewelry look dirty and old unless you have access to the best jewelry cleaner. But how should you go about cleaning jewelry?
There are plenty of options at your disposal to make sure that you have clean jewelry, and it all comes down to personal preference. Whether you prefer a jewelry cleaning solution or an ultrasonic jewelry cleaner, there is a solution for everyone.
Continue reading to learn more about choosing the best jewelry cleaner for your jewelry collection.
Choosing the Best Jewelry Cleaner
A big factor in choosing the best jewelry cleaner is knowing what your jewelry is made out of. Different cleaning solutions and cleaning methods work better for different types of metals and materials, like this plant based jewelry cleaner.
The last thing you want to do is invest in a jewelry cleaner only to find out that the chemicals in that cleaner cause your favorite piece of jewelry to tarnish and fade.
Ultrasonic Jewelry Cleaners
There are also ultrasonic jewelry cleaners. Ultrasonic jewelry cleaners work through emitting high-frequency soundwaves. These soundwaves proceed to make bubbles as well as ultrasonic vibrations within the water.
This process is very effective for removing dirt and debris that tarnish your pieces of jewelry over time. You may be wondering how this method is so effective. Why wouldn’t you choose to use soapy water and a small brush?
An ultrasonic cleaner is more effective at getting to areas on your jewelry that a brush could never dream of reaching. This is especially true for pieces of jewelry with small crevices and cavities in them.
Once you’ve placed the jewelry into the ultrasonic cleaner and start the cleaner, the bubbles that it produces start removing the dirt and contamination on your jewelry.
Since the cleaner works by using waves and bubbles, there are no areas on the jewelry that the clean can’t access. This makes it a very effective option for keeping your jewelry bright and shining.
The best part is that the cleaning process with an ultrasonic cleaner only takes a few minutes. It saves you time, and it is the surest way to get your jewelry back to looking brand new.
Things to Consider With Ultrasonic Jewelry Cleaners
There are a few things that you need to take into consideration when using an ultrasonic jewelry cleaner. The first thing that you really need to consider is time.
Time is important because it is up to you to decide and determine the best time to run the cleaner and how many cycles are needed. These cleaning cycles should differ based on how dirty the piece of jewelry is.
A normal jewelry cleaning cycle with an ultrasonic cleaning machine is somewhere between two minutes and 10 minutes. If you choose to clean for less than two minutes, you won’t see the results you desire.
Bear in mind that you might need more than one cycle for severely tarnished jewelry. With the right amount of time and cycles, you’ll have your jewelry back to looking brand new.
You’ll also need to consider the temperature. Ultrasonic cleaners work with tap water, but it is recommended that you use heated water to get the best clean.
The ideal temperature for the water when you’re using an ultrasonic cleaner is around 140 degrees Fahrenheit. Be sure to read the instructions, as some cleaning solvents require a bit more heat.
The last thing to consider is the mass and the density of the jewelry that you’re cleaning. If you put a lot of jewelry into the cleaner, it won’t come out as clean as you’d like.
The best rule of thumb for mass is that the mass of the jewelry should weigh half of what the water cleaning it weighs. If possible, do two separate loads of jewelry when cleaning large amounts.
Jewelry Cleaning Cloths
Jewelry cleaning cloths are an inexpensive and effective option for cleaning jewelry made from materials like silver. These cloths are great for not only cleaning silver items but polishing them so that they shine beautifully.
They’re great for keeping your silver jewelry from becoming tarnished. Best of all, these cleaning cloths a long time. Some last up to five years with regular use on silver jewelry.
Jewelry Cleaning Oil
Jewelry cleaning oil is another great option for making sure that you have clean jewelry. Jewelry oil is very effective for cleaning jewelry made from a variety of materials.
Depending on the jewelry cleaning oil that you get, it won’t have any harsh chemicals that are dangerous for your jewelry or the people and pets living in your home.
The cleaning process involves brushing the jewelry item with a small brush using the cleaning oil. It will help you polish it and get it back to being the beautiful piece you know and love.
There are some things, like diamonds, that are more difficult and costly to clean than other options. That doesn’t always have to be the case, though. Some diamond cleaners cost as little as $5.
It is a cheap and effective way to make your diamonds shine like the first time you ever saw them. This is especially great if they are diamonds on a wedding ring. No one wants an important piece of their life to tarnish.
Start Making Your Jewelry Pristine Today
There are a lot of factors that go into determining the best jewelry cleaner for your jewelry. An ultrasonic cleaner is versatile, easy to use, and saves you time. It is a great option for someone with a wide variety of jewelry.
Other great options are plant-based jewelry cleaners, cleaning oils, and even cleaning cloths. It all comes down to the type of jewelry you have to determine the best fit for you.
For more helpful and informative articles, be sure to explore more of our website.